At the Ann Arbor Pinball Museum we sometimes run pinball repair classes, though currently we are on hold for any more classes. The classes were mostly designed for those that help at the museum, but sometimes there’s room for others to attend. The class we’ve been running lately is “Introduction to Solid State Pinball Repair”, and is two hours long. We cap the class at 8 to 10 people max. It’s a hands-on class too. We show how to use a DMM (digital multi meter), how to solder, how to test electronic components, pinball repair do’s and don’ts, and most common pinball repairs.
Bring a DMM. You need one if you don’t have one. Flukes are great but heck even Radio Shack and Home Depot sells a decent digital multi-meter (DMM) for a reasonable price. Get auto ranging (easier to use for beginners.) Make sure it has a continuity buzz tone. Make sure it has a diode function. Otherwise all test DC and AC voltages and resistance. There are other bells but those are the big ones. Also remember you get what you pay for, so if you buy a $10 meter at Harbor Freight, don’t expect a lot (actually don’t buy a cheap meter, they really don’t work well.) Usually you need to spend $40 to $60 to get a “decent” meter. Again Fluke is king, but they are expensive. I use Tenma myself available from MCMelectronics.com but I will have a couple DMMs for people to borrow. However you really need your own meter so you can “get used to it”, as every meter operates a little differently.